Bayou Beer

All about beer brewing and drinking in South Louisiana.

Cascade First Wort Hop Pale Ale

April 7th, 2017

So I ordered whole leaf hops to use in a  Randall for Zapp’s beerfest.  I forgot to pick up the hops and my buddy forgot to bring the Randall!   Talk about not meant to be!  So while I’m waiting for the sack of Simpson’s pale malt and Simpson’s caramel malt that LA Homebrew is ordering for me, I’m going to make a beer out of the 3 ounces of hops I have.

Minor edit to the recipe.  I’m mashing at 154F.

Brew Day 4/9/2017

Brew day went very well.   Efficiency was quite high as the beer was around 1.062.   Efficiency has always been an issue of mine that I’ve not quite figured out.   Lately I’ve been attempting to use a continuous sparge in an effort to reduce labor and raise efficiency.   For me it seems like I can set it and forget it and get better results.  But those results may cause me to re calibrate how I calculate.

The first wort hopping was quite lovely on the mash.  The beer smelled extremely good.   A nice low, rich, citrus character from the cascade hops.    It was great and I was thinking man I’m going to use whole leaf hops more often.   HOWEVER, the boil was another story.  When I added whole leaf hops at flame out and started the whirlpool they clogged up everything.   The hops swell back to their original mass and just cause all sorts of issues.   Depending on how well this beer comes out I may or may not use them in the boil again.  Total pain.

The aroma though of the mash.   It was extremely complex with the hops being added.  Reminded me very much of that background aroma you get in beers like Dale’s pale ale.   I very much look forward to tasting and smelling the results of this brew.

Update 5/27/2017

Just a very smooth and great beer to drink.   The first wort hopping certainly adds to the hop flavor complexity for me.   It’s just a deeper, more savory sensation this way.   Great daily drinking beer.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
5.5 gal 60 min 36.3 IBUs 7.0 SRM 1.050 1.010 5.3 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
American Pale Ale 10 A 1.045 - 1.06 1.01 - 1.015 30 - 45 5 - 14 2.3 - 2.8 4.5 - 6.2 %

Fermentables

Name Amount %
Pale Malt (2 Row) UK 8 lbs 74.42
Munich Malt - 10L 2 lbs 18.6
Caramel/Crystal Malt - 20L 12 oz 6.98

Hops

Name Amount Time Use Form Alpha %
Cascade 2 oz 60 min First Wort Leaf 5.5
Cascade 1 oz 60 min Aroma Pellet 5.5
Citra 1 oz 0 min Aroma Pellet 12

Miscs

Name Amount Time Use Type
Gypsum (Calcium Sulfate) 7.00 g 60 min Mash Water Agent
Calcium Chloride 6.00 g 60 min Mash Water Agent

Yeast

Name Lab Attenuation Temperature
Safale American (US-05) DCL/Fermentis 77% 59°F - 75°F

Mash

Step Temperature Time
Mash In 150°F 75 min

Fuller’s Golden Pride Barleywine Clone

March 1st, 2017

So I’ve been studying for the BJCP written exam and Fuller’s Golden Pride is the example I’ve often seen for English barleywine.   Apparently you can’t buy it in the United States.   Also it doesn’t appear to be often done by homebrewers.  So using a variation of the recipes I found on a BYO interview from 2011 with the Griffin Brewery people, I’ve come up with the following.  Now the hopping is slightly different because I can’t buy Northdown around here but it should get the essence of this beer I’ve never had based on the information available.

If the mash is still producing a great deal of gravity after I run off the wort for this beer I will go all parti-gyle and create a second beer using what’s left and some EKG/Bramling Cross hops I have.

Update 3/5/2017

Brew day went fine.   I managed to end up on gravity with the golden pride beer.  Smells and tastes great.   I ended up producing a second runnings beer that’s basically a best bitter at 1.042.   It’ll probably be a bit on the “extra bitter” side due to volume being a bit of an issue.  It’s probably 4 gallons and I calculated 5.

Update 4/5/2017

So this is a very good beer at first taste.  Fairly light flavor in comparison to the barleywines I’ve been brewing but it matches the recipe.   From my experience with barleywine brewing, they seem light at first but develop complexity over 6 months.    The color is too dark for the pictures I’ve seen of Golden pride but that’s ok because I suspected it would be so after hearing back from the Fuller’s brewers who were kind enough to reply to a letter I sent them concerning homebrewing this beer.   Fuller’s has some excellent customer service!  Here are the notes I got back from the brewer:

Your recipe is definitely in the ballpark so only a few small tweaks required! The Crystal Light malt we use is closer to 100 EBC and never from Bairds- usually Simpsons. For the hopping regime we add all aroma hops at the end of the boil before we then go on to a 30 min whirlpool rest.  Challenger and Goldings are correct but we also use the beautiful Northdown hop (6%AA)- each 33% split of the total late addition.

Man talk about great help coming from their production brewers.   So I will re-brew this beer later on as soon as I either have LA Homebrew order me some Simpsons stuff or order it online.

Update 4/16/2017

Beer tastes great.  I feel like it would be “Fuller’s Amber Pride” if it were to go to market so the comments from Fuller’s brewer were spot on.   But the beer is excellent in taste so I’m happy with the brew.  It needs age to develop but basically tastes like a very strong ESB with lots of English flavor.  Looking forward to brewing the next version when I get my Simpson’s ingredients from LA Homebrew.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
6 gal 60 min 45.2 IBUs 11.6 SRM 1.085 1.025 8.0 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
English Barleywine 17 D 1.08 - 1.12 1.018 - 1.03 35 - 70 8 - 22 1.6 - 2.6 8 - 12 %

Fermentables

Name Amount %
Pale Ale Malt (Bairds) 20 lbs 95.24
Caramel/Crystal Malt - 75 (Bairds) 1 lbs 4.76

Hops

Name Amount Time Use Form Alpha %
Target 1.5 oz 60 min Boil Pellet 11
Challenger 0.5 oz 15 min Boil Pellet 7.5
East Kent Goldings (EKG) 0.5 oz 5 min Boil Pellet 5

Miscs

Name Amount Time Use Type
Gypsum (Calcium Sulfate) 14.00 g 60 min Mash Water Agent
Calcium Chloride 2.00 g 60 min Mash Water Agent

Yeast

Name Lab Attenuation Temperature
English Ale (WLP002) White Labs 67% 65°F - 68°F

Mash

Step Temperature Time
Mash In 150°F 75 min

Notes

The distilled water is actually 10 gallons of my Ascension parish well water. I need to add it to BeerSmith from my bayoubeer.com website.

 

 

Pound Town IPA

February 16th, 2017

So it’s time to brew for Zapp’s beerfest. I’ve decided to brew a beer with 5 pounds of hops per gallon. I have a newer hop called Ariana I want to try out. Supposedly it’s an excellent dry hop for big fruity aromas.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
6 gal 60 min 45.6 IBUs 9.1 SRM 1.062 1.012 6.6 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
American IPA 14 B 1.056 - 1.075 1.01 - 1.018 40 - 70 6 - 15 2.2 - 2.7 5.5 - 7.5 %

Fermentables

Name Amount %
Pilsner (2 Row) Bel 8 lbs 54.24
Munich Malt 5 lbs 33.9
Cara-Pils/Dextrine 1 lbs 6.78
Caramel/Crystal Malt - 40L 8 oz 3.39
Caramel/Crystal Malt - 60L 4 oz 1.69

Hops

Name Amount Time Use Form Alpha %
Centennial 2 oz 15 min Boil Pellet 10
Simcoe 4 oz 3 min Boil Pellet 13
Mosaic (HBC 369) 4 oz 0 min Boil Pellet 12.3
Ariana 2 oz 0 min Dry Hop Pellet 10.2

Miscs

Name Amount Time Use Type
Lactic Acid 8.00 ml 60 min Mash Water Agent
Calcium Chloride 7.00 g 60 min Mash Water Agent
Gypsum (Calcium Sulfate) 5.00 g 60 min Mash Water Agent

Yeast

Name Lab Attenuation Temperature
Safale American (US-05) DCL/Fermentis 77% 59°F - 75°F

Mash

Step Temperature Time
Mash In 150°F 75 min

Blonde Ale Before Halloween

October 14th, 2016

Trying to brew a simple blonde ale before Halloween because my wife decided to throw a party. Super simple based on Jamils but with Centennial because she likes Centennial.

Update 10/16/2016
Brew day went great. Beer looks beautiful and was fermenting well in less than 24 hours. I love just pitches 2 packs of Safale 04 since it’s a great yeast count and far less expensive than liquid yeast or starters. I did end up adding about a half pound of pilsner dry malt extract due to low efficiency. I tried out a thinner mash and went a little fast. It dropped efficiency.

Update 10/24/2016
Fermentation went extremely fast. Done in 2 days so left it on the yeast for 4 before crashing and fining with gelatin. Racked over on 21st and it was crystal clear. Started carbonating at 30 PSI for 3 days. It has a subtle hop fruitiness to it and just a slight honey sweetness. Should be a great beer for Michelle’s Halloween party where a bunch of non-craft drinkers will want to try something.

Update 11/2/2016
This ended up being a nice, refreshing beer. Everyone enjoyed it. Would brew again. Wouldn’t mind serving it with a few bottles of fruit lambic on the side to mix with it. Or just drink it tailgating.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
5.5 gal 60 min 17.0 IBUs 3.6 SRM 1.044 1.010 4.4 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
Blonde Ale 6 B 1.038 - 1.054 1.008 - 1.013 15 - 28 3 - 6 2.4 - 2.8 3.8 - 5.5 %

Fermentables

Name Amount %
Pale Malt (2 Row) US 9 lbs 94.74
Caramel Malt - 10L (Briess) 8 oz 5.26

Hops

Name Amount Time Use Form Alpha %
Centennial 0.5 oz 60 min Boil Pellet 10

Miscs

Name Amount Time Use Type
Calcium Chloride 8.00 g 60 min Mash Water Agent
Lactic Acid 8.00 ml 60 min Mash Water Agent

Yeast

Name Lab Attenuation Temperature
SafAle English Ale (S-04) DCL/Fermentis 73% 59°F - 75.2°F

Mash

Step Temperature Time
Mash In 150°F 75 min

American Pale Ale With Decoction

September 3rd, 2016

So I’m out of pale ale! I’ve been happy with what I’ve been brewing but time for a few tweaks as an experiment. Bruce Baker is always talking about a small decoction being awesome with his so I’ll try it with mine. Also going to just move the bittering addition back as a first wort hop. Oh and finally I’m using BestMaltz because the homebrew shop was out of Weyermann which I’d been using.

Update 9/5/2016

Well this has been one of those brew days. Started pouring raining during the run off. Had to fix the pump when the mash started. Had the hardest time getting the wort to run clear during the mash. Lots of stuck lines due to the grain getting clogged.(I’m guessing I need better stainless washers for the Blichmann screen) Just a total pain in the ass. Skipped that decoction just because enough was already problematic. I think all this is a combination of me not brewing for several months due to life as well as the total disarray of my brew room and garage due to the great flood which had us taking on my inlaws. The gravity came out high at 1.050 which shouldn’t be a problem and will likely help with the bitterness dude to the first wort hopping with the centennial.

Update 9/14/2016

Fermented out fine. Added dry hops once it was mostly done. 2 ounces of Amarillo and 2 ounces of Centennial which I believe is different from the recipe. That stayed for about 7 days. Transferred and carbonating. One note on this batch from the brew day: I forgot to add the crystal until the mash was about 80% done.

Update 10/10/2016

This beer is just wonderful to drink. To me it could use a little more residual sweetness but to anyone who loves a west coast pale ale this is it. Big hop aroma and huge hop flavor. Very resinous. Lots of pineapple, passion fruit, various shades of citrus. Just enough maltiness to support. I sent it to Dixie Cup so maybe I’ll get lucky and win something in the pale ale gauntlet.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
5.5 gal 60 min 44.3 IBUs 9.0 SRM 1.046 1.011 4.5 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
American Pale Ale 18 B 1.045 - 1.06 1.01 - 1.015 30 - 50 5 - 10 2.3 - 3 4.5 - 6.2 %

Fermentables

Name Amount %
Pilsen (BestMälz) 7 lbs 66.27
Munich (BestMälz) 3 lbs 28.4
Caramel/Crystal Malt - 20L 3 oz 1.78
Caramel/Crystal Malt - 40L 3 oz 1.78
Special B Malt 3 oz 1.78

Hops

Name Amount Time Use Form Alpha %
Centennial 1 oz 60 min First Wort Pellet 10
Amarillo 1 oz 1 min Boil Pellet 9.2
Centennial 1 oz 1 min Boil Pellet 10
Mosaic (HBC 369) 1 oz 1 min Boil Pellet 12.3
Citra 2 oz 0 min Dry Hop Pellet 12

Miscs

Name Amount Time Use Type
Lactic Acid 10.00 ml 60 min Mash Water Agent
Calcium Chloride 5.00 g 60 min Mash Water Agent
Gypsum (Calcium Sulfate) 5.00 g 60 min Mash Water Agent

Yeast

Name Lab Attenuation Temperature
Safale American (US-05) DCL/Fermentis 77% 59°F - 75°F

Mash

Step Temperature Time
Mash In 154°F 60 min

Notes

Doing a hop stand at 160ish for 15 minutes. Adding the bittering hops as a first wort hop addition.

Marzen 2016 Oktoberfest!

June 26th, 2016

I already can’t wait for the Fall! One week in to Summer and I’ve had enough! So in the spirit of getting ready for Fall I brewed up a nice Marzen today. It’ll be on the pale side for this style but in the past I didn’t enjoy those which had Crystal or Melanoidin malts. I thought about doing a decoction but didn’t think I’d have the time today.

June 26 Update:
Brew day went perfectly fine. The gravity ended up high at about 1.061. I guess we’ll see how it ends up! Going to pitch WLP830 from my previous small batch lager. I have more than enough for 10 gallons.
July 4, 2016 Update
Visible fermentation has stopped almost completely. The final gravity is currently around 1.017 which is a little high for style. It’s bitter enough though which holds up to it. After about a week I brought the temperature up closer to 65F for a few days. Going to leave it in the 50’s for a few more days before bringing it down to 40F. Hopefully it’ll dry out a tad more but either way it’ll be very drinkable. Has a nice herbal lemon hop thing going on to support the soft bready aromas you expect out of this beer.

July 25, 2016
This beer is really wonderful. A nice high carbonation gives the impression of dryness appropriate to this style. Bready, toasty with a nice rich maltiness that doesn’t hit sweet. It’s color is a little too golden for the oktoberfest style but who cares. Call it a festbier if you like! Will easily drink all 10 gallons. Will rebrew and add a decoction to gauge effects.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
11 gal 90 min 23.8 IBUs 6.6 SRM 1.057 1.012 5.8 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
Marzen 6 A 1.054 - 1.06 1.01 - 1.014 18 - 24 8 - 17 2.5 - 3 5.8 - 6.3 %

Fermentables

Name Amount %
Pilsner (Weyermann) 15 lbs 55.56
Munich (BestMälz) 7 lbs 25.93
Vienna (BestMälz) 5 lbs 18.52

Hops

Name Amount Time Use Form Alpha %
Magnum 1 oz 70 min Boil Pellet 13
Hallertauer Hersbrucker 1 oz 15 min Boil Pellet 2

Yeast

Name Lab Attenuation Temperature
German Lager (WLP830) White Labs 77% 50°F - 55°F

Mash

Step Temperature Time
Saccharification 152°F 60 min
Mash Out 168°F 10 min

May American IPA

May 24th, 2016

Brewing up a small IPA / Big pale ale. Hopefully going to be a great drinker. The last one I brewed with 50/50 munich/pilsner was decent but not great. Brew day went fine with around a 1.058 OG. Had a short boil so we’ll see if the whole DMS thing comes to fruition. I doubt it with this beer.

Update July 4, 2016
Although this beer came out great I didn’t get near the hop aroma I want out of an IPA. So research research research and I came upon an article from BYO on hop aroma. Well I realized I’d been creeping my dry hop additions up further because of an article I read in Zymurgy concerning Sierra Nevada adding dry hops during fermentation to get more fruitiness and less grassy. Pro brewer advice from a few notable breweries(Vinnie Cilurzo at Russian River) in the BYO article seem to indicate that you lose a lot of oil that way and can in fact hurt your aroma.

So the beer is half gone and I enjoy it. So I bottled a few and now I’ll be dropping some dry hop in to the keg. I figure 1 ounce of Citra for roughly 2.5 gallons should do fine. Using these tea balls I have hanging around should keep them from stopping up the out on the keg. Will update this again around July 15th!

The BYO article was “Advanced Dry Hopping”. Google it. I don’t link to outside sources because they tend to go away over time.

Update 7/5/2016
So I went ahead and dropped a tea ball with one ounce of Citra in my Hippidy Hoppidy rebrew from a couple of months back. The beer was just meh on hops likely due to the same reasons posted above. Well give it roughly 24 hours and the beer is much better and now something I like to drink. The Citra is very pronounced in the aroma and the front of the flavor. It smooths out in to that hop flavor that was there from the late boil additions pretty nicely as a transition. That beer like this IPA exhibited little hop aroma despite getting a nice charge of dry hop and knockout hops. I’m currently convinced a post gelatin fining addition is necessary to produce maximum aroma and flavor. I added the one ounce to the Citra IPA and we’ll see what it’s like in a few days.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
5.5 gal 30 min 57.1 IBUs 9.4 SRM 1.058 1.015 5.6 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
American IPA 21 A 1.056 - 1.07 1.008 - 1.014 40 - 70 6 - 14 2.4 - 2.9 5.5 - 7.5 %

Fermentables

Name Amount %
Pilsner (2 Row) Ger 7 lbs 58.95
Munich 10L (Briess) 3 lbs 25.26
Carapils (Briess) 8 oz 4.21
Caramel/Crystal Malt - 20L 2 oz 1.05
Caramel/Crystal Malt - 80L 2 oz 1.05
Special B Malt 2 oz 1.05
DME Golden Light (Briess) 1 lbs 8.42

Hops

Name Amount Time Use Form Alpha %
Galaxy 1 oz 30 min Boil Pellet 15.2
Centennial 2 oz 5 min Boil Pellet 10
Amarillo 2 oz 3 min Boil Pellet 9.2
Amarillo 2 oz 0 min Dry Hop Pellet 9.2
Centennial 2 oz 0 min Dry Hop Pellet 10
Simcoe 1 oz 0 min Dry Hop Pellet 13

Miscs

Name Amount Time Use Type
Lactic Acid 8.00 ml 60 min Mash Water Agent
Calcium Chloride 6.00 g 60 min Mash Water Agent
Gypsum (Calcium Sulfate) 6.00 g 60 min Mash Water Agent

Mash

Step Temperature Time
Mash In 153°F 75 min

German Pilsner 1.5 Gallon Attempt B

May 20th, 2016

Given the first attempt was more shaking out the bugs in the new brewing system this will be drastically different than the first. Switched to Saaz in this recipe because I initially intended to use Saaz but couldn’t find any in my freezer. In this second attempt everything is larger. The boil volume is 3 gallons with the hope of getting 2 in the fermenter.

On a side note I got my torpedo keg in from Morebeer. Man it’s a nice little thing. Interesting enough the keg says 1.6 gallons even though the Morebeer website lists it as 1.5 gallons.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
2.3 gal 70 min 37.2 IBUs 4.6 SRM 1.048 1.009 5.1 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
German Pils 5 D 1.044 - 1.05 1.008 - 1.013 22 - 40 2 - 5 2.5 - 3.2 4.4 - 5.2 %

Fermentables

Name Amount %
Pilsner (2 Row) Ger 4 lbs 96.97
Melanoidin (Weyermann) 2 oz 3.03

Hops

Name Amount Time Use Form Alpha %
Saaz 1 oz 70 min Boil Pellet 3.8
Hallertauer 0.13 oz 0 min Aroma Pellet 2.4

Miscs

Name Amount Time Use Type
Lactic Acid 4.00 ml 60 min Mash Water Agent
Calcium Chloride 2.00 g 60 min Mash Water Agent
Gypsum (Calcium Sulfate) 2.00 g 60 min Mash Water Agent

Yeast

Name Lab Attenuation Temperature
German Lager (WLP830) White Labs 77% 50°F - 55°F

Mash

Step Temperature Time
Mash In 150°F 75 min

German Pilsner 1.5 Gallon Attempt A

May 14th, 2016

So this will be my first go at brewing 1.5 gallon batches of beer. Lately I’ve had an interesting go of it with brewing beers I’ve not perfected yet. American stout and American porter came out mediocre at best. I straight dumped about 8 gallons of the stout because to me it was undrinkable. My 10 gallons of German pilsner were very nice and a great lager but I want world class. I mean hell who wants to drink 8 gallons of great lager when you want great German pilsner? So I’m going to try my hand at small batches. It’ll allow me to do induction brewing in my beer room with air conditioning. It’ll allow me to take up less room and not have to waste so much if it doesn’t end up well. Most importantly it’ll allow me quick turnover to perfect some of these recipes that require very honed in recipes and practices.

So I’d already built a small mash tun for single infusion brewing. It’s a 5 gallon water cooler. I purchased a 5 gallon induction ready pot off Amazon. Also picked up a 1800 watt induction cook top on Amazon. I already had a couple of 3 gallon better bottles I purchased a few years back to small brew lager batches. I think this small scale will give me good feedback on new recipes. It’ll also allow me to brew in the air conditioning and do it quickly. Time is always tight with kids.

This will be German pilsner rebrew of the recipe I brewed a few months back. Feedback from 2 different judging sessions was scattered at best. From what I can tell it needed improvement in two places. 1. It wasn’t bitter enough or hoppy enough. So Going to give it late hops and a bit more bitterness. 2. Improve maltiness yet make it dry. So adding a tad of melanoidin malt. Also going to make it a bit more carbonated to impress dryness since the last beer was dry enough as far as gravity was concerned.

Update 5/17/2016

So the brew day went very smooth in terms of process. I did have a few issues in regards to volume. The volume ended up a little low due to my Beersmith equipment profile being off in the calculations. The beer will be pretty close in it’s original gravity at 1.05 but I’ll be lucky to end up with a gallon. I suppose I didn’t think about the loss to trub and the boil off not being linear things when scaling down to a 1.5 gallon batch. So we’ll see how this guy ends up but I’ve already concocted the Attempt B to try again.

All in all it was a lot of fun to brew in the air conditioning with the control of the electric cook tops and the small size, weight and cost. I ordered a 1.5 gallon Torpedo keg from Morebeer.com and am looking forward to trying that out. Hoping to end up with a stack of 4 of those kegs in my kegerator along side 3 regular rotating beers so that I can experiment without having to waste or choking down a bad beer.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
1.8 gal 60 min 38.8 IBUs 4.8 SRM 1.045 1.009 4.8 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
German Pils 5 D 1.044 - 1.05 1.008 - 1.013 22 - 40 2 - 5 2.5 - 3.2 4.4 - 5.2 %

Fermentables

Name Amount %
Pilsner (2 Row) Ger 3 lbs 96
Melanoidin (Weyermann) 2 oz 4

Hops

Name Amount Time Use Form Alpha %
Hallertauer Hersbrucker 0.55 oz 60 min Boil Pellet 6
Hallertauer 0.13 oz 0 min Aroma Pellet 4.8

Miscs

Name Amount Time Use Type
Lactic Acid 4.00 ml 60 min Mash Water Agent
Calcium Chloride 2.00 g 60 min Mash Water Agent
Gypsum (Calcium Sulfate) 2.00 g 60 min Mash Water Agent

Yeast

Name Lab Attenuation Temperature
German Lager (WLP830) White Labs 77% 50°F - 55°F

Mash

Step Temperature Time
Mash In 150°F 75 min

Hippidy Hoppidy Rebrew

May 1st, 2016

Floated the rest of the last keg I had. I really enjoyed the brew for Zapp’s so we’re brewing it again. Adding a tad more crystal 40 and made minor changes to the hop schedule. Basically a little less simcoe and more mosaic.

The brew day was April 30 and went fine. Beer came out around 1.048 original gravity. Pitched and was bubbling well within 24 hours.

Recipe Details

Batch Size Boil Time IBU SRM Est. OG Est. FG ABV
5.5 gal 30 min 43.9 IBUs 8.5 SRM 1.048 1.010 4.9 %

Style Details

Name Cat. OG Range FG Range IBU SRM Carb ABV
American Pale Ale 10 A 1.045 - 1.06 1.01 - 1.015 30 - 45 5 - 14 2.3 - 2.8 4.5 - 6.2 %

Fermentables

Name Amount %
Munich Malt 5 lbs 45.45
Pilsner (2 Row) Ger 5 lbs 45.45
Cara-Pils/Dextrine 8 oz 4.55
Caramel/Crystal Malt - 40L 8 oz 4.55

Hops

Name Amount Time Use Form Alpha %
Galaxy 1 oz 30 min Boil Pellet 15.2
Centennial 1 oz 1 min Boil Pellet 10
Citra 1 oz 1 min Boil Pellet 12
Simcoe 1 oz 1 min Boil Pellet 13
Centennial 1 oz 0 min Aroma Pellet 10
Citra 1 oz 0 min Aroma Pellet 12
Mosaic (HBC 369) 2 oz 0 min Dry Hop Pellet 12.3

Miscs

Name Amount Time Use Type
Lactic Acid 11.00 ml 60 min Mash Water Agent
Calcium Chloride 8.00 g 60 min Mash Water Agent
Gypsum (Calcium Sulfate) 6.00 g 60 min Mash Water Agent

Yeast

Name Lab Attenuation Temperature
Safale American (US-05) DCL/Fermentis 77% 59°F - 75°F

Mash

Step Temperature Time
Mash In 152°F 60 min

Notes

Didn't have as much pilsner on hand as I thought I did. Luckily I had pilsner DME at the houes. Original plan was to use Magnum for bitter but ran out so used Columbus instead.

Bayou Beer

All about beer brewing and drinking in South Louisiana.

↓
This website uses a Hackadelic PlugIn, Hackadelic Sliding Notes 1.6.5.